CI8L NEW Cobranet Input Module with 8 anolog line level input
This product can be shipped to a restricted list of countries :
check availability
Item Price : 1055.91 € (*)
Reference : CI8L
Stock : please inquire for pricing and delay
The Whirlwind CI8L converts 8 analog line level channels of audio to CobraNet digital networked data.
The CI8L is Whirlwind's 8-channel CobraNet line level input module. Use it to convert line level analog audio into professional quality digital audio, for distribution over CobraNet digital networks. The CI8L can be temporarily or permanently connected to the CobraNet network, anywhere network access and AC power are available. Connect any line level source such as mixer matrix or aux outputs, speaker system crossover outputs, or surround sound processor outputs and instantly send them throughout the CobraNet digital audio network. Setup and operation are simple and easy. Just set the bundle select wheels to the desired transmit bundle number, and set the bitwidth:latency selector to match the bitwidth and latency of the receiving device. Then apply the eight channels of audio and adjust the input level as necessary, ensuring that the level is below the 0 dB clipping level.
FEATURES
Uses CobraNet networking protocol compatible with all other CobraNet devices from over 40 manufacturers.
Transmits 20 or 24 bit word length.
Transmits 5.33 ms, 2.66 ms or 1.33 ms latencies.
Multiple transmitters may be accessed through CobraNet Discovery.
Input level controls can provide 35 dB of gain or 43 dB of attenuation to the analog input signal.
Front panel LED meters indicate analog signal level.
Integrated universal power supply for 100-250 VAC, 50/60 Hz operation
The CI8L is 1 RU high and mounts in standard 19” racks.
Frequency Response
± .74 dBv 20-20 kHz at unity gain
Total Harmonic Distortion +noise
< .0028 % 20-20 kHz at unity gain
Dynamic Range
107 dBv at unity gain, 97 dBv at 20 dBv of gain 98 dBv at 20 dBv of attenuation
Stereo Separation
< -98 dBv at 20 kHz <-112 dBv at 1 kHz
Total Gain
35 dBv
Range of level pot
-43 dBv to + 35 dBv
Common Mode Rejection of Input
70 dBv at 60 Hz
Maximum Input level
+19 dBv
Input Impedance
20 k Ohms balanced
Noise at various gains
-97 dBv at unity, -87 dBv at 20 dBv of gain -98 dBv at 20 dBv of attenuation
LED threshold
0 dBfs, -12 dBfs, and –36 dBfs
Thermals
Fan cooled with off, low, and high fan speeds. Fan on low at 30°C internal temperature and on high speed at 40°C internal temperature. 5 to 43°C operating range
Power consumption
27 Watts idle, 40 Watts max
Power requirements
85-264 VAC, 50 or 60 Hz
Size
19" x 1.75" x 10" (W x H x D)
Weight
8.7 lb.
Internal Mains fuse
2.5 A slo-blo (replaceable)
All specifications subject to change without notice